These are custom made OpenBuilds Tee Nuts. Â They were designed to slide into slots with less hassle than the standard rectangular tee nuts. Â They have angled corners to allow for a smooth transition. OpenBuilds Tee Nuts fit V-Slot and most aluminum tee slot extrusion that has at least a 10mm wide tee nut slot.
The Hillman Group The Hillman Group 4143 10-24 x 9/32 x 3/4 In. Stainless Steel Round Base Tee Nut (2 Packs of 12)
Manufacturer: The Hillman Group
Brand: The Hillman Group
These tee nuts put steel threads into wood without the need for counter boring. Just hammer the nut into a predrilled hole in the wood until flush and then fix in place with brad nails hammered through the holes in the base of the nut.
50 ALL Aluminum POP Rivet (6-20) 3/16 x 1-1/4" Grip
Manufacturer: The Rivet Gallery
Brand: The Rivet Gallery
50 ALL Aluminum POP Rivet (6-20) 3/16" Diameter x 1-1/4" Max Grip*** A WORD ABOUT GRIP LENGTH *** ALL rivets are sized by DIAMETER x MAX GRIP. If the rivet title says 1/8" x 1/4" OR 1/8" x 1/4" GRIP (or MAX GRIP) then the rivet body has a diameter of 1/8", and the GRIP of the rivet is for material thickness UP TO 1/4" The ACTUAL RIVET LENGTH WILL BE LONGER THAN THE STATED MAX GRIP TO ALLOW FOR "BLIND SIDE" DEFORMATION TO SET THE RIVET. AGAIN, rivets will ALWAYS be longer than the GRIP stated.
Micro TeeA Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the work of the same connector style.Gold contacts for greatest reliabilityKeyed connectors for error-free connectionsMale (left)Female (right)Female (Bottom) Product : MARETRON MICRO TEE MALE (LEFT) FEMALE (BOTTOM) FEMALE (RIGHT) Manufacturer : MARETRON Manufacturer Part No : CM-CF-CF UPC : 873804001647