CRL TogglerÂ® Hollow-Wall Anchors for 3/8" to 1/2" (9 to 13 mm) - Package of 100
Manufacturer: C.R. LAURENCE
Brand: C.R. Laurence
C.R. LAURENCE T11010 CRL Toggler Hollow-Wall Anchors for 3/8" to 1/2" (100 Pack). The CRL Togglerr Hollow-Wall Anchors provide secure holding power for light and medium loads. They are safe and reliable, absorb vibration and shock, and won"t damage walls. Also, corrosion-proof, highly acid and base resistant, and rustproof. Install in a small 5/16" (8 mm) diameter hole. Anchors pre-install without screws. Can be used with a screw gun. Protect walls from spalling and breakthrough. Colorless and translucent make them-blend into wall color and texture.. Part Numbers Variations: T11010
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
C.R. LAURENCE TB51618 CRL Snaptoggle 5/16" - 18 Toggle Anchor (10 Pack). CRL SNAPTOGGLEr Toggle Anchors pre-install without a bolt and can be installed using a screw gun because the anchor won"t spin in the hole. They also allow for bolt or fixture removal without the anchor falling behind the wall. SNAPTOGGLEr can be used in drywall, plaster, cement board, hollow walls of block, brick, stucco, fiberglass, and wood. NOTE: Bolts sold separately.. Part Numbers Variations: TB51618
Toggler, 5 Pack, 3/8"-1/2", TB Hollow Wall Anchors With Screws, Patented Mechanism Provides Secure Holding Power For Light & Medium Loads, Key Activated Locking Action Makes The Anchor A Rigid, Weight Distributing Truss In Hollow Walls, Providing Maximum Security In The Smallest Possible Hole, Can Be Used In Drywall Or Plaster Walls & In Hollow Doors Or Thin Panels, Accepts Any Type Wood, Sheet Metal, Or Stainless Steel & Size Of Screw From #6 Through #14.
Toggler, 5 Pack, 3/8"-1/2", TH Picture Hangers With #8 x 1-1/2" Screws, 1 Setting Key, Allows You To Hang Wall Decor Quickly, Easily & Securely, Built-In Hook For Hanging Paintings, Prints, Mirrors & Anything Framed When Used With A Screw In Hollow Walls, Holds 3 Times More Than Old Fashioned Nail In Metal Picture Hooks, Weight Of The Picture Rests On The Screw, Close To The Wall, Preventing Pull Out.
Toggler, 5 Pack, 3/8"-1/2", TBW Wire Shelf Anchors With #8 x 1-3/4" Screws, 1 Setting Key, Makes Installing Wire Shelving Easy, Designed Specifically For Wire Shelving Systems, Each Anchor Is Equipped With A Retainer Clip That Locks The Shelving In Place, Shelf Won't Tip Even When The Weight Is Distributed Unevenly Or Near The Edge, Ideal For Use With Systems Like Closetmaid.
The Hillman Group 375319 Number-8 Wallboard Anchor, Zinc-Inch, 100-Pack
Manufacturer: The Hillman Group
Brand: The Hillman Group
The Wallboard anchor is a one-piece self drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. Ideal for mounting electrical fixtures, fastening drapery supports, installing phone systems, miscellaneous hardware, etc.
The TOGGLER ALLIGATOR A8 flush-mount anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted flush with the surface of a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/4". The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole when a screw is inserted. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/2" Drywall3,500 psi ConcreteA5/AF53/16"#8 sheet metal screw57 lb.544 lb.A6/AF61/4"#10 sheet metal screw69 lb.675 lb.A8/AF85/16"#12 sheet metal screw85 lb.1,025 lb.A103/8"#14 sheet metal screwN/A1,168 lb.Ultimate Shear Strength ValuesAnchorDrill DiameterScrew Description1/2" DrywallA5/AF53/16"#8 sheet metal screw125 lb.A6/AF61/4"#10 sheet metal screw153 lb.A8/AF85/16"#12 sheet metal screw171 lb.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.