Screw Anchor, Lead Alloy Sleeve and Zinc Alloy Expander, Internally Threaded, Meets GSA Meets FF-S-328 Group 1 Type 1 Class 1, 1/2" Drill Diameter, 7/8" Minimum Embedment Depth, 1/4"-20 Threads (Pack of 100)
Manufacturer: PORTEOUS FASTENER COMPANY
Brand: Small Parts
The internally threaded screw anchor with 1/4"-20 threads is made of corrosion-resistant zinc alloy and lead alloy; provides a secure hold in most materials including solid concrete, hollow C-90 concrete block, and solid red brick; and meets Federal Specification GSA FFS-325 Group II Type 2 Class 2 Style 2 standards. The anchor has a zinc alloy expansion sleeve and lead alloy conical expander that expands the surrounding sleeve when a threaded machine screw is inserted, gripping the mounting material and holding the anchor in place. Also known as a caulk-in or machine-bolt anchor, it has a 1/2" drill diameter and 7/8" minimum embedment depth. The anchor includes an installation tool.SpecificationsDrill diameter1/2"For bolt size1/4"-20Minimum embedment depth7/8"Tensile strength in 4,000-psi concrete2,340 lb.Shear strength in 4,000-psi concrete1,800 lb.Tensile strength in C-90 hollow brick concrete880 lb.Shear strength in C-90 hollow brick concrete1,340 lb.Tensile strength in solid red brick1,460 lb.Shear strength in solid red brick1,580 lb.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the specifications sheet.Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.What's in the Box?100 screw anchors1 installation tool
Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8" Diameter, 5" Length, 3-1/4" Threaded Length (Pack Of 20)
The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor body, washer, nut, and clip are made of 304 stainless steel for increased corrosion resistance compared to galvanized or zinc-plated steel anchors. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 1-3/4" or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain.SpecificationsUltimate Tensile Strength for Static LoadsAnchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete1/4"1-1/4"2,000 lb.2,042 lb.1/4"2-1/2"2,600 lb.2,826 lb.3/8"1-3/4"3,850 lb.4,790 lb.3/8"4-5/8"6,020 lb.6,635 lb.1/2"2-1/8"6,324 lb.7,540 lb.1/2"6-1/4"8,249 lb.10,713 lb.5/8"2-5/8"9,527 lb.10,597 lb.5/8"6"15,893 lb.16,705 lb.3/4"3-3/4"13,130 lb.18,979 lb.3/4"7-7/8"19,795 lb.24,145 lb.7/8"4"16,591 lb.19,945 lb.7/8"8"27,484 lb.33,113 lb.1"5"26,676 lb.30,683 lb.1"9"36,171 lb.36,171 lb.1-1/4"5-5/8"28,733 lb.28,733 lb.1-1/4"10"50,390 lb.50,390 lb.Ultimate Shear Strength for Static LoadsAnchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete1/4"1-1/4"2,811 lb.2,811 lb.1/4"2-1/2"2,811 lb.2,811 lb.3/8"1-3/4"3,075 lb.3,075 lb.3/8"4-5/8"4,227 lb.4,227 lb.1/2"2-1/8"6,260 lb.6,260 lb.1/2"6-1/4"7,516 lb.7,516 lb.5/8"2-5/8"9,760 lb.9,760 lb.5/8"6"11,743 lb.11,743 lb.3/4"3-3/4"15,860 lb.15,860 lb.3/4"7-7/8"23,817 lb.23,817 lb.7/8"4"24,000 lb.24,000 lb.7/8...
Manufacturer: Hillman Group Rsc
Brand: The Hillman Group
The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for "Stud Mechanical Expansion Anchors". It is building code approved and can also be used with treated lumber.
Simpson Strong Tie CSD25300MG Simpson Strong-Tie CSD25300 Countersunk Head Mechanically Galvanized Split Drive Anchor 1/4-inch by 3-inch 100 per Box
Manufacturer: Simpson Strong Tie
Brand: Simpson Strong-Tie
The Split Drive anchor is a one piece anchor, with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. Can be installed in concrete, grout-filled block and stone. Available in mushroom, countersunk and duplex-head styles. The duplex head Split Drive is designed for temporary fastening applications and can be removed using a claw hammer.
Red Head HW4-600 Tapcon Hex Washer Head 1/4-Inch by 6-Inch Anchor (100 per Box)
Manufacturer: Red Head
Brand: ITW Red Head
From the manufacturer: Tapcon makes the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Blue climaseal provides extended corrosion protection. Each boxes comes with 100 anchors and 1 carbide tipped tapcon drill bit. ITW tapcons are made in the USA. Specifications Fixture Thickness: 4-1/2" - 5" Recommended Tapcon Length: 6" (152.4mm) Bit Length: 7-1/2" (190.5mm)
Simpson Strong Tie THD37500H 3/8-Inch by 5-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
Manufacturer: Simpson Strong Tie
Brand: Simpson Strong-Tie
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.
Manufacturer: Designated Parking Corp.
Brand: AAG Asphalt Anchors Group
The SP10-38 is used in conjunction with our EPX2 grout to bond with existing asphalt. Constructed from zinc plated steel, the bottom of the anchor is flared and sealed to act as a wedge when pushing the anchor into the ground. A welded spiral along the length of the anchor provides for a strong bond with the grout. The top of the anchor incorporates a large washer with internal female 3/8" thread accommodating up to 2" of thread. Supplied with 1" washer and 3/8" x 1" hex-head bolt. Requires EPX2 grout, one half a bag per anchor.